Genmitsu Cnc 3018-pro Software

Software

Most of the 3018 style Cnc engravers come equipped with Arduino clone hardware so they will be delivered with copies of Candle or other Grbl based software to control these machines. I use Candle for my 3018 pro machine and I have a full review of this machine at this link, 3018 review. New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. The base height is raised to 4cm for better stability.

  • Install the usb to serial driver from USB: 3018ProCNC SoftwareGRBL SoftwaredriverCH340SER.EXE
  • Download and flash the latest GRBL .hex firmware from: https://github.com/gnea/grbl/releases
    • use XLoader provided from USB: 3018ProLaser SoftwareBrush FirmwareGRBL 1.1XLoaderXLoader.exe
    • for settings choose Device: Uno (ATmega328), Baud rate: 115200
    • select the .hex file you downloaded from the grbl link above on Github
  • Calibrate the X/Y/Z axis stepper motors so they move the correct amount.
    From the grblControl software you can set them by sending these 3 commands (in order, X, Y, Z):
    This will set the correct steps/mm amount for the motors I was working with, you may need to adjust these numbers yourself. You can do so by measuring the distance the motor moves in millimeters and adjust the value until it is correct. For example, draw a line exactly 100mm long on your cutting surface and set the X-Axis value to 600 by issuing the command `$100=600`, then issue `X100` to move 100mm along the X axis. If it doesn't move exactly 100mm, adjust the 600 value up or down until it does.
    - see GRBL docs: https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration#100-101-and-102--xyz-stepsmm
  • The Y axis and Z axis are inverted and must be configured.
    From the grblControl software invert them by sending this command:
    This bitmask will invert the Y axis (2) and Z axis (4)
    - see GRBL docs: https://github.com/gnea/grbl/wiki/Grbl-v1.1-Configuration#3--direction-port-invert-mask
Genmitsu

Sainsmart Genmitsu Cnc 3018 Pro Software

Back in September of 2018 I reviewed the Sainsmart Genmitsu 3018 Pro.Sainsmart has now further upgraded the 3018 and asked for a review of it. Let’s take a look at the changes and the evolution of the 3018 and see if the increase in price is worth it. The Genmitsu 3018-PRO is a great tool for getting started with CNC learning. If wood-working or DIY crafting is your hobby, you can use it to add features like curved words and exquisite patterns. If you are a student just learning CNC, it can help you engrave models that you can design with the included CARVECO Maker design software. How to assemble Genmitsu CNC Router 3018 Pro Step by Step. Genmitsu 3018-pro cnc router kit is the latest model and it can provide better stability. CNC 3018 / 2418 / 1610 Assembly Instructions. Product description feature of mains powered smoke alarms. CNC 3018 Pro Engraving Machine Collection. The controller says it loads a file, but then.